Good resistance to sulfuric and hydrofluoric acids. Aeration
however will result in increased corrosion rates. May be used to
handle hydrochloric acid, but the presence of oxidizing salts will
greatly accelerate corrosive attack.
Resistance to neutral, alkaline and acid salts is shown, but poor
resistance is found with oxidizing acid salts such as ferric
Excellent resistance to chloride ion stress corrosion cracking.
All the raw materials will be firstly made pipeline cutting.
It is consisted of a series of bare oil(carbon steel,alloy steel,or
durable heat steel) and header and other auxiliaries.
TubesΦ32,38,42 and so on,also as the request.
With the artistic apperance and accurate size,the advance process
for bending tube and welding,the first rate test equipment and
|Pendant-type||1.Firm structural support||1. Flow blockage by condensed steam 2. Needs slow restart to purge
the water that accumulates in the bottom.||supported from above|
|Inverted-type||1.Proper drainage of the condensed steam||1. Lack the structural rigidity, especially in high speed gas flow||Supported from below|
1. Proper drainage
2. Good structural rigidity.
|1. They do not view the flam directly so they are mainly from the
convective type||Usually supported in the vertical gas ducts parallel to the main
Feed water and steam generator tubing.
Brine heaters, sea water scrubbers in tanker inert gas systems.
Sulfuric acid and hydrofluoric acid alkylation plants.
Pickling bat heating coils.
Heat exchangers in a variety of industries.
Transfer piping from oil refinery crude columns.
Plant for the refining of uranium and isotope separation in the
production of nuclear fuel.
Pumps and valves used in the manufacture of perchlorethylene,
Monoethanolamine (MEA) reboiling tube.
Cladding for the upper areas of oil refinery crude columns.
Propeller and pump shafts.
Send us required technical data, such as steam capacity, presure,
required temperature etc. We will design accordingly.